Denso SE1-BB, User Manual, Page: 59 / 86

46
Plessey
Items Parameters Defaults Refer to:
Enable
Reading Plessey
Disable *
Section 11.2
Single
Mode of reading Plessey
Dual *
Section 11.2
Minimum number of readable digits
for Plessey
4 digits
Maximum number of readable digits
for Plessey
4 to 99 digits
(incl. 2-digits C/D)
99 digits
(See Note 1.)
(Note 1) The parameter setting ranges are different from the numbers of digits that the scanner can actually read.
GS1 Databar (RSS)
Items Parameters Defaults Refer to:
Enable
Reading GS1 DataBar Omnidirectional
& GS1 DataBar Truncated (Note 1)
Disable *
Enable
Reading GS1 DataBar Stacked & GS1
DataBar Stacked Omnidirectional (Note 2)
Disable *
Enable
Reading GS1 DataBar Limited
(Note 1)
Disable *
Enable
Reading GS1 DataBar Expanded
(Note 1)
Disable *
Enable
Reading GS1 DataBar Expanded
Stacked (Note 2)
Disable *
Convert to GS before Transmission *
FNC1 transmission of GS1 DataBar
Expanded
Disable
Section 11.2
Minimum number of readable digits for
GS1 DataBar Expanded & GS1 DataBar
Expanded Stacked (Note 1) (Note 2)
1 digit
Maximum number of readable digits for
GS1 DataBar Expanded & GS1 DataBar
Expanded Stacked (Note 1) (Note 2)
1 to 99 digits
99 digits
(See Note 3.)
(Note 1) These show GS1 DataBar Omnidirectional (RSS-14), GS1 DataBar Truncated (RSS-14 Truncated),
GS1 DataBar Limited (RSS Limited), and GS1 DataBar Expanded (RSS Expanded).
(Note 2) These show GS1 DataBar Stacked (RSS-14 Stacked), GS1 DataBar Stacked Omnidirectional (RSS-14 Stacked Omnidirectional),
and GS1 DataBar Expanded Stacked (RSS Expanded Stacked).
(Note 3) The setting ranges are different from the numbers of digits that the scanner can actually read.
(11) Trigger switch control
Items Parameters Defaults Refer to:
Auto-off mode *
Momentary switching mode
Trigger switch control mode
Alternate switching mode
Section 5.1
Enable *
Break Bluetooth
®
wireless link
Disable
Section 3.3
: Can be changed only with the configuration software.