Denso SE1-BB, User Manual, Page: 8 / 86

iv
Handling the scanner
Wrong handling of the scanner could result in a heat, smoke, or scanner failure. Be sure to observe
the following

If smoke, abnormal odors or noises come from the scanner, immediately remove the battery and
contact your nearest dealer.
Failure to do so could cause fire or electrical shock.

If foreign material or water gets into the scanner, immediately remove the battery and contact
your nearest dealer.
Failure to do so could cause fire or electrical shock.

If you drop the scanner so as to affect the operation or damage its housing, remove the battery
and contact your nearest dealer.
Failure to do so could cause fire or electrical shock.

Do not use the scanner where any inflammable gases may be emitted.
Doing so could cause fire.

Do not subject the scanning window of the scanner to direct sunlight for extended periods.
Doing so could damage the scanner, resulting in a fire.

Stop charging if it cannot be completed within the specified time.

Never put the scanner into a microwave oven or high-pressure container.
Doing so could cause the batteries to break, generate heat, rupture or burn.

Never use the scanner on the line voltage other than the specified level.
Doing so could cause the charger to break or burn.

Use the dedicated battery only.
Failure to do so could result in fire.