Denso SE1-BB, User Manual, Page: 58 / 86

45
Code 128, GS1-128 (EAN-128)
Items Parameters Defaults Refer to:
Enable *
Reading Code 128
Disable
Enable *
Reading GS1-128 (EAN-128)
Disable
Section 11.2
(See Note 2.)
Minimum number of readable digits
for Code 128
1 digit
Maximum number of readable digits
for Code 128
1 to 99 digits
(excluding start/stop codes and
1-digit check digit)
99 digits
(See Note 1.)
Minimum number of readable digits
for GS1-128 (EAN-128)
1 digit
Maximum number of readable digits
for GS1-128 (EAN-128)
1 to 99 digits
(excluding start/stop codes and
1-digit check digit)
99 digits
(See Note 1.)
Disable
Transmission of FNC1 for Code 128
Transmit GS *
Disable
Transmission of FNC1 for GS1-128
(EAN-128)
Transmit GS *
Section 11.2
(Note 1) The setting ranges are different from the numbers of digits that the scanner can actually read.
(Note 2) Using the Bar-coded parameter menu enables or disables reading of both Code 128 and GS1-128 (EAN-128) at the same time.
Code 93
Items Parameters Defaults Refer to:
Enable
Reading Code 93
Disable *
Section 11.2
Minimum number of readable digits
for Code 93
1 digit
Maximum number of readable digits
for Code 93
1 to 99 digits
(excluding start/stop codes and
2-digit check digit)
99 digits
(See Note 1.)
(Note 1) The parameter setting ranges are different from the numbers of digits that the scanner can actually read.
MSI
Items Parameters Defaults Refer to:
Enable without C/D
Enable with C/D (1 digit)
Enable with C/D (2 digits)
Reading MSI
Disable *
Section 11.2
Enable *
C/D transmission of MSI
Disable
Section 11.2
Minimum number of readable digits
for MSI
3 digits
Maximum number of readable digits
for MSI
3 to 99 digits
(incl. C/D)
99 digits
(See Note 1.)
(Note 1) The parameter setting ranges are different from the numbers of digits that the scanner can actually read.