5
2.3 Breaking
Bluetooth
Wireless Links
Holding down the magic key for approx. 2 seconds or scanning the "Break Bluetooth
wireless link" QR Code symbol
forcibly breaks the scanner's Bluetooth
wireless link. (The QR Code symbol is given in Section 3.2 and its procedure
in Section 3.1.)
Note:
Breaking the Bluetooth
wireless link does not disable the Bluetooth
interface. To disable it, scan the "End
operation" QR Code symbol.
Note:
In the data verification mode, the magic key is used to enter a master code, not used to break the Bluetooth
wireless link. To break the link, use the scanner to read the "Break Bluetooth
wireless link" QR Code symbol given in
Section 13.2 using the procedure in Section 13.1.
Note that when the scanner, as a master, is searching for a connection target or it is, as a slave, waiting for a master to
connect, the magic key can break the Bluetooth
wireless link.
2.4 Reestablishing
Bluetooth
Wireless Links
When the scanner's Bluetooth
wireless link has been broken by any of the following events, pressing the trigger
switch reestablishes the Bluetooth
wireless link. The scanner as a slave waits for a connection request from the
master; the scanner as a master connects to a target slave.
- Scanning the "Break Bluetooth
wireless link" QR Code symbol (See Sections 13.1 and 13.2.)
- Pressing the magic key to break the Bluetooth
wireless link
- Modifying the scanner configuration with the configuration software (ScannerSetting_2D)
- "Reconnect request" dialog displayed by the configuration software (ScannerSetting_2D)
- Replacing the battery cartridge
