1
Chapter 1 Names and Functions
Reading window
• Auto sensing mode
Point this at the code to
read.
The factory default setting is auto-off
mode.
Magic key
Holding down this key for approx. 2
seconds breaks Bluetooth
®
wireless
links. This key also functions as an
auxiliary key for reads, data transfers,
and the like. These auxiliary functions
include:
- Data retransfer function
- Ready/standby switching function
- Readable code switching function
- Marker mode switching function
- Specific character transfer function
- Bar code reader mode switching
function
The factory configuration assigns none
of these functions to this key.
(Refer to Chapter 6 for details.)
Trigger switch
Press this to read data or initiate a
Bluetooth
®
wireless link.
The following read modes* are
available to match the needs of the
intended application.
• Auto-off mode
• Momentary switching mode
• Alternate switching mode
• Continuous reading mode 1
• Continuous reading mode 2
(Refer to Chapters 2 and 5 for details.)
Indicator LED
This turns blue after a successful read and red if
there is an error. It also indicates the Bluetooth
®
interface status and, when the scanner is in its
charger, the charging status.
(Refer to Section 8.2 for details.)
Built-in antenna
Bluetooth
®
antenna.
Do not modify this
antenna section or cover it
by hand.
Battery cover
Remove this to replace the battery
cartridge.
(Refer to Chapter 10 for details.)
Vibrator
The vibrator is integrated here.
It offers configuration choices: indicating
successful scanning (OK) and an error (NG).
The factory default setting is "OK" vibrations.
(Refer to Section 8.3 for details.)
