CK0063 - Rev 03.2
53158 Range Road 224
Ardrossan, AB
Canada, T8E 2K4
1
INTENDED USE
The
ODI-II
is a mini encoder designed to provide the encoded position of two probes along the
scan axis.
2
SPECIFICATIONS
Clamp width:
45 mm
(1.75 in)
Encoder wheel diameter:
20.57 mm
(0.810 in)
Encoder resolution:
16.00 counts/mm
(406.4 counts/inch)
Environmental sealing:
Watertight (submersible), Contact JIREH for details
Weight:
0.36 kg
(0.8 lb)
Operating environment:
-20°C
(-4°F)
to 50°C
(122°C)
3
MAINTENANCE
Wipe the scanner clean as required. Do not soak or submerge the scanner in cleaner or solvent
of any kind.
4
PREPARATION FOR USE
4.1. Probe Holder Setup
1.
Loosening the probe holder adjustment knobs
(Fig. 1)
allow the probe holders to be
positioned along the frame bar.
2.
The encoder position may be adjusted by loosening the encoder adjustment knob
(Fig. 2)
.
3.
Position the probe holder arms after loosening the arm clamp screw or probe holder arm
adjustment knob
(Fig. 3)
.
4.
Loosen the probe holder arm adjustment knob to remove the probe holder arm
(Fig. 3)
.
Fig. 1
- Frame bar positioning
Fig. 2
- Encoder positioning
Fig. 3
- Probe holder arm adjustment
USER MANUAL
ODI-II
KEEP THIS MANUAL – DO NOT LOSE
THIS MANUAL IS PART OF THE
ODI-II
SYSTEM AND MUST BE RETAINED FOR THE
LIFE OF THE PRODUCT. PASS ON TO SUBSEQUENT OWNERS.
Ensure any amendments are incorporated with this document.
The
WEEE
symbol indicates that the product must not be disposed of as
unsorted municipal waste, but should be collected separately
.
