Denon D-107, Operating Instructions Manual

Page: 9 / 80

9
ENGLISH
t
VOLUME , buttons
• Press to lower or raise the volume.
• The volume increase when the
button is
pressed and decreases when the button is
pressed.
• When one of the buttons is pressed, the
volume level changes in 65 steps. The level is
indicated on the display, ranging from “Volume
00” (minimum) to “63” then “Max”. (Electronic
control)
y
Disc door
• Press the
5
button to open and close the door.
• When a disc is loaded, it is drawn in
automatically and the door closes.
• The door automatically closes if it is left open
for about 1 minute.
u
5
button
• Press this button to open and close the disc
door.
• When pressed in the standby mode, the power
turns on and the disc door opens.
i
Display
• See page 9.
o
REMOTE SENSOR
• Aim the supplied remote control (RC-909) at
this sensor and operate.
!0
1
/
3
button
• Press this button to start playing a disc.
• The pause mode is set when this button is
pressed while a CD is playing.
When pressed while in the pause mode,
playback resumes.
• When pressed while the disc door is open, the
disc door closes and playback begins.
• When pressed in standby mode, the power
automatically turns on and playback begins.
[Auto on function]
• When pressed while the function is set to
anything other than “CD”, the function
switches to “CD” and the CD starts playing.
[Auto on selection]
!1
Main unit stand
• Mount using the included screws. (See page 7.)
!2
DIGITAL OUT OPTICAL terminal
!3
AUX IN terminals
!4
AUX OUT terminals
• No signals are output from these terminals
when the function is set to “AUX”.
!5
FM antenna terminal (ANTENNA FM)
• See page 8.
!7
SYSTEM CONTROL terminal
!8
Speaker terminals
!9
Speaker stand
@0
SYSTEM CONTROL terminal
@1
Power supply cord
@2
SPEAKER SYSTEM terminals
(2) Display
q
Mode display portion (Timer section)
• This indicates the timer status.
: This lights when the timer is set to
“ON”. It is also lit when the timer is in
the standby mode. When the timer is
set to “OFF”, the indicator is off, even
if the timer times are set.
SLEEP : This lights when the sleep timer is
activated.
w
Mode display portion (CD section)
• This indicates the CD mode.
1
: Lights during play.
3
: Lights during pause.
: Lights as follows during
repeat play.
This lights as follows each
time the REPEAT button is
pressed:
1
REPEAT
(RC-909)
MP3 : This lights when a disc containing MP3
format files is loaded.
FILE : This lights when the file name in the
MP3 ID3-Tag is displayed.
TITLE : This lights when the title name in the
MP3 ID3-Tag is displayed.
FOLDER : This lights in the folder selection
mode.
ARTIST : This lights when the artist name in the
MP3 ID3-Tag is displayed.
ALBUM : This lights when the album name in
the MP3 ID3-Tag is displayed.
PROG : Lights as follows during program play.
RAND : Lights during random play.
This lights as follows each
time the RANDOM button
is pressed:
e
Menu function display section
• This lights when in the menu function.
r
Mode display portion (Tuner section)
• This indicates the tuner mode.
P.SET : This flashes when presetting AM/FM
stations, then stops flashing when the
station is preset.
AUTO : This lights when the “FM AUTO”
mode is selected with the BAND
button.
: This lights during tuner reception when
an AM or FM station is properly tuned
in.
ST : Lights when stereo is selected.
MONO : This lights when the “FM MONO”
mode is selected with the BAND
button and when receiving a monaural
broadcast while in the “FM AUTO”
mode.
MEMO : This lights when presetting AM/FM
stations, then turns off when the
station is preset.
t
Mode display portion
(Tone control section)
• This indicates sound adjustment modes.
SDB : This lights when the SDB (Super
Dynamic Bass) function is set to
“ON”.
TONE : This lights when the level has been
adjusted using the tone controls
(BASS, MID and TREBLE).
y
Mode display portion
(Multi-display section)
• This indicates the various functions.
• When the function is set to “TUNER”, the
reception band and reception frequency are
displayed here.
• When the function is set to “CD”, the disc
number, number of tracks, current track
number, playing time and the various operating
modes are displayed here.
• When the MENU button is pressed,
the display switches to the displays
of the various modes.
MENU
(RC-909)
e
2 /BAND button
• In CD function, press this button to stop
playback.
• In tuner function, each time this button is
pressed, the band and FM reception mode
change as follows:
FM AUTO FM MONO AM
r
8
/
−
, +/
9
buttons
• Press the
9
and
8
buttons to move to the
beginning of a specific track while in CD
function. (See page 22.)
• When the function is set to “TUNER”, press
these button to select the preset number. (See
page 16.)
• Press these button to select the menu function.
(See pages 13, 14.)
[For a music CD]
(1-track repeat) (All-track repeat)
Not lit
(Repeat mode off)
1 FOLDER
[For MP3 files]
(1-track repeat)
(All-track repeat)
Not lit
(Repeat mode off)
(1-folder all-track repeat)
RANDOM
(RC-909)
RAND
[For a music CD]
(All-track random mode)
Not lit
FOLDER RAND RAND
[For MP3 files]
(1-folder all-track
random mode)
Not lit
(Random mode off)
(All-track random mode)
(Random mode off)
!6
AM antenna terminals (ANTENNA AM)
• See page 8.