Get
ting Star
ted
Connections
Set
up
Pla
ybac
k
Remot
e Contr
ol
Multi-z
one
Inf
or
mation
Tr
oubleshooting
Specifi
cations
Make detail settings for various parameters.
Manual Setup
F
Menu screen
F
MENU
1.Auto Setup
2.Manual Setup
3.Input Setup
4.Parameter
5.Information
Speaker Setup
Use this procedure to set the speakers manually or if you wish to
change the settings made with the auto setup procedure
.
a
Speaker Confi guration
Select speaker confi guration and size.
(bass reproduction capability)
Front Speaker
Select front speaker size.
[Selectable items]
Large
Small
Subwoofer
Select subwoofer use.
[Selectable items]
Yes
No
Center Speaker
Select center speaker use and size.
[Selectable items]
Large
Small
None
For details on how to select, set and cancel settings for each menu, see “Menu Operations” (
v
page 20).
Even when the surround back speaker setting is other than
“None”, sound may not be emitted from the surround back
speaker, depending on the playback source. In this case, make
a menu “Parameter” – “Surround Parameter” – “SB CH Out”
setting other than “OFF” (
v
page 44).
Large
: Select this when using large speakers with ample low
frequency reproduction capabilities.
Small
: Select this when using small speakers without ample low
frequency reproduction capabilities.
None
: Select this when no speaker is connected.
Yes
: Select this when a subwoofer is connected.
No
: Select this when no subwoofer is connected.
2spkrs
1spkr
:
Select the number of surround back speakers.
Surround Back Speaker
Select surround back speaker use and size.
[Selectable items]
(
Large
Small
None
)
(
2spkrs
1spkr
)
Surround Speaker
Select surround speaker use and size.
[Selectable items]
Large
Small
None
2.Manual Setup
2.HDMI Setup
1.Speaker Setup
4.ZONE2 Setup
5.Option Setup
3.Audio Setup
NOTE
Since “Amp Assign” of AVR-989 is set to “ZONE2” by default, audio
is not output from the surround back speakers. When using the
surround back speakers with MAIN ZONE, change the “Amp Assign”
setting to “7.1ch” (
v
page 32).
Set
up
uio p
<MENU>
SOURCE SELECT
<SPEAKERS>
Button located on both the main unit
and the remote control unit
BUTTON
Button only on the main unit
<BUTTON>
Button only on the remote control unit
[BUTTON]
Symbols used to indicate buttons in this manual
2-1.Speaker Setup
2.Subwoofer Setup
1.Speaker Config.
4.Channel Level
5.Crossover Freq.
6.Front Speaker Setup
3.Distance
SOURCE
SELECT
uio p
uio p
[TEST]
[A. MENU]
SOURCE
SELECT
[Front]
[Rear]
AVR989EU_ENG_080630.indd 27
2008/06/30 15:26:52
