Get
ting Star
ted
Connections
Set
up
Pla
ybac
k
Remot
e Contr
ol
Multi-z
one
Inf
or
mation
Tr
oubleshooting
Specifi
cations
Multi-zone Operations
Turning the Power On and Off
G
Operation on the main unit
H
Press
<ZONE2 ON/OFF>
.
When the power turns on, the multi-zone indicator (
) lights on
the display.
G
Operation on the remote control unit
H
In the zone mode you want to operate, press
[ZONE2 ON]
or
[ZONE2
OFF]
.
Turning off the Sound Temporarily
q
Set
[SOURCE CONTROL 1]
to “AUDIO” and
[SOURCE CONTROL 2]
to “ZONE2”.
w
Press
[MUTING]
.
The sound is reduced to the level set at menu “Manual Setup”
– “ZONE2 Setup” – “Mute Level” (
v
page 32).
To cancel, either adjust the volume or press
[MUTING]
again.
The setting is canceled when the zone’s power is turned off.
• The source selected for ZONE2 is also output from the recording
output connectors.
• When the input source to which the digital input connectors
(OPTICAL/COAXIAL) are assigned is selected in ZONE2, playback is
only possible if the digital signal being input is in PCM (2-channel)
format.
NOTE
• Digital audio signals input from the HDMI connectors cannot be
played in multi-zone.
• When certain digital signals are being input, noise may be output
from the ZONE2 audio output connectors.
Adjusting the Volume
G
Operation on the main unit
H
q
Press
<ZONE2 / REC SELECT>
and select the zone to be adjusted.
w
Turn
<VOLUME>
to adjust.
G
Operation on the remote control unit
H
q
Set
[SOURCE CONTROL 1]
to “AUDIO” and
[SOURCE CONTROL 2]
to “ZONE2”.
w
Press
[VOLUME]
.
– – –
–70dB
~
–40dB
~
+18dB
[Variable range]
Selecting the Input Source
G
Operation on the main unit
H
q
Press
<ZONE2 / REC SELECT>
and select the zone to be adjusted.
w
Turn
<
SOURCE SELECT
>
.
G
Operation on the remote control unit
H
q
Set
[SOURCE CONTROL 1]
to “AUDIO” and
[SOURCE CONTROL 2]
to “ZONE2”.
w
Press
[SOURCE SELECT]
.
• Also press
[SOURCE SELECT]
when in standby mode, the power
turns on.
• When using ZONE2, it is possible to turn the power for the MAIN
ZONE only on or off by pressing
[MAIN ON]
or
[MAIN OFF]
.
Multi-z
one
<ZONE2 ON/OFF>
<VOLUME>
<SOURCE SELECT>
<ZONE2 / REC SELECT>
Button located on both the main unit
and the remote control unit
BUTTON
Button only on the main unit
<BUTTON>
Button only on the remote control unit
[BUTTON]
Symbols used to indicate buttons in this manual
• The volume can be increased up to the value set at menu “Manual
Setup” – “ZONE2 Setup” – “Volume Limit” (
v
page 32).
• The ZONE2 volume can be adjusted only when “ZONE2” is selected
at menu “Manual Setup” – “Option Setup” – “Amp Assign”
(
v
page 32).
[SOURCE
CONTROL 1]
[SOURCE
CONTROL 2]
[SOURCE
SELECT]
[VOLUME]
[MUTING]
[ZONE2 ON]
[MAIN ON]
[MAIN OFF]
[SOURCE
SELECT]
[ZONE2 OFF]
[Front]
[Rear]
AVR989EU_ENG_080630.indd 67
2008/06/30 15:27:42
