Denon AVR-989 Owner'S Manual Download

Page: 8 / 86

Get
ting Star

ted

Connections

Set
up

Pla
ybac

k
Remot

e Contr

Multi-z

one

Inf
or

mation

oubleshooting

Specifications

Input signal indicators

Input signal channel indicators

These light when digital signals are input.

Information display

The input source name, surround mode, setting values and other

information are displayed here.

Output signal channel indicators

Front

speaker indicator

These light according to the settings of the front A and B

speakers.

ZONE2 output indicator

This lights when the power for the ZONE2 is turned on.

Master volume indicator

AUDYSSEY MULTEQ XT indicator

This lights when MultEQ XT is selected.

Input mode indicators

Recording output source indicator

This lights when the REC OUT mode is selected.

NIGHT indicator

This lights when the night mode is selected.

RESTORER indicator

This lights when the RESTORER mode is selected.

AL24 indicator

This lights when AL24 Processing Plus is activated (

page 70).

HDMI indicator

This lights when playing using HDMI connections.

Decoder indicators

These light when the respective decoders are operating.

Tuner reception mode indicators

This lights according to the reception conditions when the input

source is set to “TUNER”.

•

AUTO

This lights when in the auto tuning mode.

•

STEREO

In the FM mode, this lights when receiving analog stereo
broadcasts.

•

TUNED

This lights when the broadcast is properly tuned in.

Display

Get
ting Star

ted

AVR989EU_ENG_080630.indd 5

2008/06/30 15:26:01

Summary of Contents for AVR-989























































































Search results

Summary of Contents for AVR-989

Reviews:

Related manuals for AVR-989

Brands by name

Popular brands

Denon AVR-989, Owner'S Manual

Search results

Summary of Contents for AVR-989

Reviews:

Related manuals for AVR-989

Brands by name

Popular brands