Denon AVR-989 Owner'S Manual Download Page 21

Page: 21 / 86

Get
ting Star

ted

Connections

Set
up

Pla
ybac

k
Remot

e Contr

Multi-z

one

Inf
or

mation

oubleshooting

Specifications

NOTE

Keep the power cord unplugged until the XM Mini-Tuner and Home
Dock connection have been completed.

XM Connector

• The AVR-989 is an XM Ready

receiver. You can receive XM

Satellite Radio by connecting to the XM Mini-Tuner and Home Dock
(includes home antenna, each sold separately) and subscribing to the
XM service.

• Plug the XM Mini-Tuner and Home Dock into the XM connector on

the rear panel.

• Position the Home Dock antenna near a south-facing window to

receive the best signal.

For details, see “Listening to XM Satellite Radio Programs” (

page

52 ~ 54).

When making connections, also refer to the operating instructions of

the XM Mini-Tuner and Home Dock.

XM Mini-Tuner and Home Dock

• The XM name and related logo are registered trademarks of XM

• XM Ready

is a registered trademark of XM Satellite Radio Inc.

NOTE

Keep the power cord unplugged until the SiriusConnect Home Tuner
connection have been completed.

SIRIUS Connector

• The AVR-989 is a SIRIUS Satellite Radio Ready

receiver. You can

receive SIRIUS

Satellite Radio by connecting to the SiriusConnect

Home Tuner and subscribing to the SIRIUS service.

• Plug the SIRIUS connector on the rear panel.
• Position the Home Tuner antenna near a south-facing window to

receive the best signal.

For details, see “Listening to SIRIUS Satellite Radio Programs”

(

page 54, 55).

When making connections, also refer to the operating instructions of

the SiriusConnect Home Tuner.

SiriusConnect Home Tuner

©2006 SIRIUS Satellite Radio Inc. “SIRIUS”, the SIRIUS dog logo,
and channel names and logos are trademarks of SIRIUS Satellite
Radio Inc.

When connecting digital of the SiriusConnect Home Tuner, perform
the setting “Input Setup” – “Assign” – “Digital In” from the menu.
(

page 38).

When connecting
digital audio

Positioning the Antenna

For a consistent satellite signal, the antenna must be positioned
correctly. Use the following map to determine which area you are in
and position the antenna accordingly.

SOUTH

NORTH

WEST

SKY

EAST

HORIZON

Area 1

Point the antenna toward the sky in the

east

northeast

, or

southeast

, either through a window or outside.

Area 2

Point the antenna toward the sky in the

north

northeast

either through a window or outside.

Area 3

Point the antenna toward the sky in the

north

northwest

either through a window or outside.

Area 4

Point the antenna toward the sky in the

west

northwest

, or

southwest

, either through a window or outside.

Area 5

Put the antenna outside and point it

straight up

. The antenna

cannot be used indoors.

Connections

AVR989EU_ENG_080630.indd 18

2008/06/30 15:26:24

Summary of Contents for AVR-989























































































Search results

Summary of Contents for AVR-989

Reviews:

Related manuals for AVR-989

Brands by name

Popular brands

Denon AVR-989, Owner'S Manual

Search results

Summary of Contents for AVR-989

Reviews:

Related manuals for AVR-989

Brands by name

Popular brands