Delta RetroSign GRX-1, User Manual

Page: 60 / 80

RetroSign GRX User Manual / December 2017
60
DELTA
Activating the remote button
Turn the power on by sliding the switch on the back of remote button.
The remote button battery is expected to last several years and therefore, under normal conditions
turning the power off is virtually not necessary.
Pairing the remote button
To make the remote button on the extension pole work you need to pair it with the GRX. This only
needs to be done once.
•
Before pairing, make sure that the remote button is not connected to any other devices. If
connected with a different device, it will not enter the pairing mode. To disconnect the remote
button, turn the Bluetooth connection off from the GRX. Go to
‘Settings’ in the main
menu, select
‘Bluetooth’ and click the ‘On/Off’ button.
•
Press the remote button for 15 seconds until a green and red LED flashes alternately. Once
you come to this stage, the remote button is now ready for pairing. From the GRX, go to
‘Settings’ and select ‘Bluetooth’. Make sure the Bluetooth is switched On.
•
Click on the
‘CODAWheel’ device.
Once paired, the extension pole button will have the same functionality as the GRX trigger button.
Remote button sleep mode
To conserve battery power, the button automatically enters into a sleep mode after a period of
inactivity. To leave the sleep mode, simply click the remote button and a red LED lamp will start
flashing to show the reconnection between the GRX and the remote button. Once the remote button
becomes re-activated, it does not require any other setup.