Delta RetroSign GRX-1, User Manual

Page: 2 / 80

RetroSign GRX User Manual / December 2017
2
DELTA
USA Statement
Note:
RetroSign GRX (includes a certified module: Contains FCC ID 2AIG4-MOD1) has been tested and
found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•
Consult the dealer or an experienced radio/TV technician for help.
RF Exposure statement:
RetroSign GRX is compliant with the requirement for RF exposure in US with 80 mm separation
distance between the user and / or bystander of the device.
Canada Statement
Note:
RetroSign GRX (includes a certified module: IC: 21541-
MOD1) complies with Industry Canada’s
license-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil (avec un module homologué: IC: 21541-MOD1) est conforme aux CNR
d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée
aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage; et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
RF Exposure statement:
RetroSign GRX is compliant with the requirement for RF exposure in Canada with 80 mm separation
distance between the user and / or bystander of the device.
Retro Sign GRX est conforme à l'exigence de l'exposition aux RF au Canada avec une distance de
séparation de 80 mm entre l'utilisateur et / ou spectateur de l'appareil.