Delta Modulon DPH 200kVA, User Manual, Page: 184 / 232

7-16
Modulon DPH Series
7.7 Main Menu
There are three main menu buttons
MEASUREMENT
ௗ
SETUP
ௗ
MAINTENANCE
; positions are shown in the figure
below.
On-Line
POWER FLOW
Maintenance
Bypass
Bypass
Mains
90 %
5 mins
Load
30 %
MEASUREMENT
Power Flow
UPS-1.1 SETUP MAINTENANCE EVENT LOG
Power Flow
Summary
System Status
LOG IN
Administrator
10:15
May 25,2018
Main Menu
Button
Description
MEASUREMENT
Press the button to go to the Measurement Menu . In the menu, you can
check the UPS’s readings including the following:
1. Main Input
2. Bypass Input
3. Inverter Output
4. Power Module Summary
5. UPS Output
6. Battery Status
For more information, please refer to
7.9 Check System Readings
.
SETUP
Press the button to go to the Setup Menu . In the menu, you can set up the
following settings.
1. Bypass Setting
2. Mode Setting
3. Output Setting
4. Battery & Charging Setting
5. Parallel Setting
6. Dry Contact Setting
7. General Setting
8. IP Setting
9. Control
For more information, please refer to
7.10 UPS Settings
.