Delta Modulon DPH 200kVA, User Manual, Page: 127 / 232

6-9
6
ௐ ௐ
UPS Operation
6
After 20 seconds of LCD initialization, the LCD will enter the Main Screen shown in
Figure 6-7
and the tri-color LED indicator will illuminate yellow. For the location of the
tri-color LED indicator, please refer to
Figure 2-11
.
Standby
POWER FLOW
Maintenance
Bypass
Bypass
Mains
90 %
5 mins
Load
0 %
MEASUREMENT
Power Flow
UPS-1.1 SETUP MAINTENANCE
Power Flow
Summary
System Status
LOG IN
User
2
WARNING
10:15
May 25,2018
User Login
ON/ OFF
Button
(Figure 6-7 : Main Screen_ User Login & ON/ OFF Button Location)
7 Press the ON/ OFF button ( ) once and the following screen will pop up to ask you
if you want to power on the UPS’s inverter. Please select ‘ YES ’.
Standby
MEASUREMENT
Power Flow
UPS-1.1 SETUP MAINTENANCE EVENT LOG
POWER ON ?
No
Yes
LOG IN
User
10:15
May 25,2018
(Figure 6-8: Power On Reminder Screen)
8 After selection of ‘ YES ’ to start up the UPS’s inverter, each power module will start up,
each power module’s LED indicator will illuminate green and each power module will
perform self-inspection. After the self-inspection is completed, the UPS will automatically
transfer to run in battery mode. At this moment, the tri-color LED indicator illuminates
yellow and the following screen appears. For the tri-color LED indicator location, please
refer to
Figure 2-11
.