Dell XPS 8910 Service Manual Download Page 121

Page: 121 / 133

Main

Cache L3

Displays the processor L3 cache size.

Table 5. System setup options—Advanced menu

Advanced

Advanced BIOS Features

Intel SpeedStep Technology

Allows you to enable or disable Intel
Speedstep Technology. Default: Enabled.

NOTE: If enabled, the processor
clock speed and core voltage are
adjusted dynamically based on the
processor load.

Intel Virtualization Technology

Allows you to enable or disable Intel
Virtualization Technology feature for the
processor.

VT for Direct I/O

Allows you to enable or disable Intel
Virtualization Technology feature for the
Direct I/O.

SATA Operation

Allows you to configure the operating
mode of the integrated SATA hard drive
controller.

Intel Ready Mode Technology

Allows you to enable or disable the Intel
Ready Mode Technology.

Intel Software Guard Extensions

Allows you to enable or disable Intel
Software Guard Extensions.

BIOS Recovery from Hard Drive

Allows you to enable or disable BIOS
Recovery from hard drive.

USB Configuration

Front USB Ports

Allows you to enable or disable the front
USB ports.

Rear USB Ports

Allows you to enable or disable the rear
USB ports.

Power Options

121

Summary of Contents for XPS 8910






































































































































Search results

Summary of Contents for XPS 8910

Reviews:

Related manuals for XPS 8910

Brands by name

Popular brands

Dell XPS 8910, Service Manual

Search results

Summary of Contents for XPS 8910

Reviews:

Related manuals for XPS 8910

Brands by name

Popular brands