Dell XPS 8910 Service Manual Download Page 124

Page: 124 / 133

Security

System Password

Displays the system password.

HDD Password

Displays the hard drive password.

Firmware TPM

Displays the firmware TPM.

Table 7. System setup options—Boot menu

Boot

Boot List Option

Displays the available boot devices.

File Browser Add Boot Option

Allows you to set the boot path in the
boot option list.

File Browser Del Boot Option

Allows you to delete the boot path in
the boot option list.

Secure Boot Control

Allows you to enable or disable the
secure boot control.

Load Legacy OPROM

Allows you to enable or disable the
Legacy Option ROM.

Boot Option Priorities

Displays the available boot devices.

Boot Option #1

Displays the first boot device. Default:
UEFI: Windows Boot Manager.

Boot Option #2

Displays the second boot device.
Default: Onboard NIC Device.

Boot Option #3

Displays the third boot device. Default:
Onboard NIC Device.

Table 8. System setup options—Exit menu

Save & Exit

Save Changes and Reset

Allows you to exit system setup and
save your changes.

Discard Changes and Reset

Allows you to exit system setup and
load previous values for all system
setup options.

Restore Defaults

Allows you to load default values for all
system setup options.

124

Summary of Contents for XPS 8910






































































































































Search results

Summary of Contents for XPS 8910

Reviews:

Related manuals for XPS 8910

Brands by name

Popular brands

Dell XPS 8910, Service Manual

Search results

Summary of Contents for XPS 8910

Reviews:

Related manuals for XPS 8910

Brands by name

Popular brands