instructions for
workstation with 2 drawers, 2 cupboard & open
storage
model no:
ap1905a
thank you for purchasing a sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
1. safety
warning!
Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this bench.
9
locate bench in a suitable working area.
9
Keep the work area clean, uncluttered and ensure there is adequate lighting.
warning!
use bench on level and solid ground, preferably concrete.
Avoid tarmacadam since the bench may sink into the surface.
9
Keep the bench clean and tidy in accordance with good workshop practice.
9
Keep children and unauthorised persons away from the working area.
8
do not
use the bench
for any purpose other than that for which it is designed.
8
do not
exceed maximum capacity of workbench.
8
do not
undertake work on the bench without the work piece being adequately secured. use clamps or a vice (not included) to secure the
work piece. Available from your sealey dealer.
8
do not
use the bench out of doors.
8
do not
get the bench wet or use in damp or wet locations or areas where there is condensation.
8
do not
clean the bench with any solvents which may damage the paint surface or the protective coating on the wooden top.
2.
i
introduction
Heavy duty powder coated metal frame with a 40mm mdf work surface. storage splits into three sections with a choice of cupboards, drawers
and an open space with an adjustable shelf. All cabinet drawers fitted with ball bearing runners and cupboards include a hanging peg board on
the inside of the door. Fully lockable and features adjustable feet to help stability. Supplied flat packed with two keys.
3. specification
model no: ................................................................ AP1905A
size (W x d x H):................................... 1690 x 600 x 865mm
drawer (x2): ............................................415 x 160 x 415mm
capacity: ...................................................................... 300kg
4. contents
4.1.
panels etc.
AP1905A | issue 1 13/04/16
Original Language Version
© Jack sealey limited
refer to
instructions
Part
description
Quantity
A
top
1
B1
left side
1
B2
right side
1
c
Bottom
1
d1
left support
1
d2
right support
1
e
drawer
2
f1
left door
1
f2
right door
1
g
shelf
3
H
Back
3
i
leg leveller assy.
4
J1
left slide
2
J2
right slide
2
K
rail
2
