Dell Precision Workstation 690 User Manual Download Page 165

Page: 165 / 167

Center

to place a single copy of an image in the center of the screen

Stretch

to place a single copy of an image to fit the size of the screen

Click

to accept the settings and close the

Display Properties

window.

Choosing a Screen Saver

Click the

Start

button, click

Control Panel

, and then click

Appearance and Themes

Under

Pick a task...

, click

Choose a screen saver

Choose a screen saver from the

Screen Saver

drop-down menu or click

(None)

if you prefer not to activate a screen saver.

If you select a screen saver, you can click

Settings

to change the various features of the screen saver.

Click

Preview

to run the currently selected screen saver and press <Esc> to cancel the preview.

Click

to accept the settings and close the

Display Properties

window.

Choosing a Desktop Theme

To change the appearance of your desktop and add sound effects by using desktop themes:

Click the

Start

button, click

Control Panel

, and then click

Appearance and Themes

Under

Pick a task...

, click

Change the computer's theme

In the

Display Properties

window, select a theme from the

Theme

drop-down menu.

Click

Creating and Arranging Shortcuts

A shortcut is an icon on the desktop that provides quick access to programs, files, folders, and drives you might frequently use.

Creating Shortcuts

Open Windows Explorer or My Computer and find the file, program, or drive for which you want to create a shortcut.

Right-click and drag the highlighted item to the Windows desktop.

Click

Create Shortcut(s) Here

in the pop-up menu.

You can double-click the shortcut icon that appears on your desktop to open the item.

Arranging Shortcuts

To move a shortcut, click and drag the shortcut to the desired location.

To arrange all the shortcut icons at one time:

Right-click an empty spot on the Windows desktop to display a pop-up menu.

Point to

Arrange Icons By

and click the option for the icon arrangement you prefer.

NOTE:

If you cannot see your desktop, minimize any open windows to make your desktop visible.

Summary of Contents for Precision Workstation 690








































































































































































Search results

Summary of Contents for Precision Workstation 690

Reviews:

Related manuals for Precision Workstation 690

Brands by name

Popular brands

Dell Precision Workstation 690, User Manual

Search results

Summary of Contents for Precision Workstation 690

Reviews:

Related manuals for Precision Workstation 690

Brands by name

Popular brands