manualshive.com logo in svg

Dell Precision Workstation 490, User Manual

Share
Download
Dell Precision Workstation 490 User Manual Download Page 74

  

1  drive 

 

 

9.

Gently slide the drive into the FlexBay until you hear a click or feel the drive securely installed.  
 

 

  

10.

Attach the power and data cables to the floppy drive.  
 

 

  

11.

Connect the other end of the data cable to the system board connector labeled "DSKT." To locate the system board connector, see 

System Board 

Components

.  

 

  

 

 

12.

Replace the desktop drive retainer insert and fold the handle down.  
 

 

  

13.

Check all cable connections, and fold cables out of the way to allow for airflow between the fan and cooling vents.  
 

 

  

14.

Reinstall the drive panel (see 

Replacing the Drive Panel

).  

 

 

  

15.

Ensure that all connectors are properly cabled and firmly seated.  
 

 

  

16.

Replace the computer cover (see 

Replacing the Computer Cover

).  

 

 

 

17.

Connect your computer and devices to their electrical outlets, and turn them on.  
 

See the documentation that came with the drive for instructions on installing any software required for drive operation. 

 

 

18.

Enter the system setup program (see 

System Setup

) and select the appropriate 

Diskette Drive 

option.  

 

 

  

19.

Verify that your computer works correctly by running the Dell Diagnostics. See 

Dell Diagnostics

 for instructions.  

 

2  screws 

1  power cable 

2  data cable 

3  floppy-drive connector (DSKT) 

 

NOTICE: 

To connect a network cable, first plug the cable in to the network port or device and then plug it in to the computer.

Summary of Contents for Precision Workstation 490











































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands