Dell PowerVault DL2200 CommVault Owner'S Manual Download Page 101

Page: 101 / 164

Installing System Components

101

Figure 3-17.

Removing and Installing an iDRAC6 Enterprise Card

If applicable, install the VFlash media card. See "Installing a VFlash Media
Card" on page 103.

Close the system. See "Closing the System" on page 65.

Reconnect the system and peripherals to their power sources, and turn
them on.

VFlash SD card

VFlash media slot

iDRAC6 Enterprise card

retention standoff posts (2)

retention standoff tabs (2)

iDRAC6 Enterprise card connector

book.book Page 101 Wednesday, May 12, 2010 9:26 PM

Summary of Contents for PowerVault DL2200 CommVault





































































































































































Search results

Summary of Contents for PowerVault DL2200 CommVault

Reviews:

Related manuals for PowerVault DL2200 CommVault

Brands by name

Popular brands

Dell PowerVault DL2200 CommVault, Owner'S Manual

Search results

Summary of Contents for PowerVault DL2200 CommVault

Reviews:

Related manuals for PowerVault DL2200 CommVault

Brands by name

Popular brands