manualshive.com logo in svg

Dell PowerVault DL2200 CommVault, Owner'S Manual, Page: 17 / 164

Share
Download
Dell PowerVault DL2200 CommVault Owner'S Manual Download Page 17

About Your System

17

Guidelines for Connecting Optional 
External Devices

•

Turn off power to the system and external devices before attaching a new 
external device. Turn on any external devices before turning on the system 
(unless the documentation for the device specifies otherwise).

•

Ensure that the appropriate driver for the attached device has been 
installed on the system.

•

If necessary, use the System Setup program to enable ports on your system. 
S

ee "Using the System Setup Program and UEFI Boot Manager" on 

page 39.

NIC Indicator Codes

Figure 1-4.

NIC Indicators

1

link indicator

2

activity indicator

Indicator

Indicator Code

Link and activity 
indicators are off

The NIC is not connected to the network.

Link indicator is green

The NIC is connected to a valid network link 
at 1000 Mbps.

Link indicator is amber

The NIC is connected to a valid network link 
at 10/100 Mbps.

Activity indicator is green Network data is being sent or received.

1

2

book.book  Page 17  Wednesday, May 12, 2010  9:26 PM

Summary of Contents for PowerVault DL2200 CommVault





































































































































































Reviews:

No comments