manualshive.com logo in svg

Dell POWEREDGE R710, Hardware Owner'S Manual

The Dell POWEREDGE R710 is a powerful server designed for optimal performance and scalability. Unlock its full potential with the comprehensive User Manual, available for free download from manualshive.com. This manual provides step-by-step instructions and valuable insights to maximize productivity and make the most of your Dell POWEREDGE R710 server.

Share
Download
background image

58

Using the System Setup Program and UEFI Boot Manager

SATA Settings

Displays a screen to enable or disable the integrated 
SATA controller and ports. See "SATA Settings Screen."

Boot Settings

Displays a screen to specify the boot mode (BIOS or 
UEFI). For BIOS boot mode, you can also specify the 
boot devices. See "Boot Settings Screen."

Integrated Devices

Displays a screen to enable or disable integrated device 
controllers and ports, and to specify related features 
and options. See "Integrated Devices Screen."

PCI IRQ Assignment

Displays a screen to change the IRQ assigned to each of 
the integrated devices on the PCI bus, and any installed 
expansion card that requires an IRQ. See "PCI IRQ 
Assignments Screen."

Serial Communication

Displays a screen to enable or disable the serial ports 
and specify related features and options. See "Serial 
Communication Screen."

Embedded Server 
Management

Displays a screen to configure the front-panel LCD 
options and to set a user-defined LCD string. See 
"Embedded Server Management Screen."

Power Management

Enables you to manage power usage of the processor(s), 
fans, and memory modules with preconfigured or 
customized settings. See "Power Management Screen."

System Security

Displays a screen to configure the system password and 
setup password features. See "System Security Screen," 
Using the System Password," and "Using the Setup 
Password" for more information.

Keyboard NumLock
(

On

 default)

Determines whether your system starts up with the 
NumLock mode activated on 101- or 102-key keyboards 
(does not apply to 84-key keyboards).

Report Keyboard Errors
(

Report

 default)

Enables or disables reporting of keyboard errors during 
the POST. Select 

Report

 for host systems that have 

keyboards attached. Select 

Do Not Report

 to suppress 

all error messages relating to the keyboard or keyboard 
controller during POST. This setting does not affect the 
operation of the keyboard itself if a keyboard is attached 
to the system.

Option

Description

Summary of Contents for POWEREDGE R710

















































































































































































































Reviews:

No comments

Related manuals for POWEREDGE R710

D-Link DFE-690TXD Quick Install Manual preview
DFE-690TXD
Brand: D-Link Pages: 12
3Com 3C3FE574BT Quick Start Manual preview
3C3FE574BT
Brand: 3Com Pages: 8
X-Micro XWL-11GPRG Quick Start Manual preview
XWL-11GPRG
Brand: X-Micro Pages: 9
X-Micro XWL-11GPAG Quick Installation Manual preview
XWL-11GPAG
Brand: X-Micro Pages: 19
Alcad ZA-431 Quick Start Manual preview
ZA-431
Brand: Alcad Pages: 6
SeaLevel 7406e User Manual preview
7406e
Brand: SeaLevel Pages: 17
Nvidia nForce 680I LT SLI Hardware User Manual preview
nForce 680I LT SLI
Brand: Nvidia Pages: 80
Direct IP IDIS DR-1304P Operation Manual preview
IDIS DR-1304P
Brand: Direct IP Pages: 76
Zoom B9.1ut Operation Manual preview
B9.1ut
Brand: Zoom Pages: 88
MC PCIe-DIO96H User Manual preview
PCIe-DIO96H
Brand: MC Pages: 21
NEC Thin Client US310e Getting Started preview
Thin Client US310e
Brand: NEC Pages: 6
Rainbow QPBB Instruction Manual preview
QPBB
Brand: Rainbow Pages: 2
Intercoax IXWB-450 Quick Start Manual preview
IXWB-450
Brand: Intercoax Pages: 2
Nortel BayStack 660 Use Manual preview
BayStack 660
Brand: Nortel Pages: 163
Baracoda Scan Dongle User Manual preview
Scan Dongle
Brand: Baracoda Pages: 16
Xtreme SNMP-2PV2 User & Installation Manual preview
SNMP-2PV2
Brand: Xtreme Pages: 83
PairGain 150-2230-01 Quick Installation Manual preview
150-2230-01
Brand: PairGain Pages: 48
YASKAWA CP 040 RS422/485 Manual preview
CP 040 RS422/485
Brand: YASKAWA Pages: 87

Brands by name

Popular brands

Load more brands