Dell POWEREDGE R710, Hardware Owner'S Manual

Page: 187 / 208

Jumpers and Connectors
187
Figure 6-8. Optional PCIe x16 Expansion-Card Riser 2 Components
Disabling a Forgotten Password
The system's software security features include a system password and a setup
password, which are discussed in detail in "Using the System Setup Program
and UEFI Boot Manager." The password jumper enables these password
features or disables them and clears any password(s) currently in use.
CAUTION:
Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
1
Turn off the system, including any attached peripherals, and disconnect
the system from the electrical outlet.
2
Open the system. See "Opening the System."
3
Move the password jumper plug to the disabled position (pins 4 and 6).
1 chassis intrusion switch 2 plunger
3 slot 3 PCIe x16 link (full-height, 24.13-
cm [9.5-in] length) 4 pin collars (2)
5 card edge connector
3
4
1
2
5