manualshive.com logo in svg

Dell POWEREDGE R710, Hardware Owner'S Manual

The Dell POWEREDGE R710 is a powerful server designed for optimal performance and scalability. Unlock its full potential with the comprehensive User Manual, available for free download from manualshive.com. This manual provides step-by-step instructions and valuable insights to maximize productivity and make the most of your Dell POWEREDGE R710 server.

Share
Download
background image

Troubleshooting Your System

165

11

Reconnect the system to the electrical outlet, and turn on the system and 
attached peripherals.
If the problem is not resolved, 

see "Getting Help."

Troubleshooting a Tape Backup Unit

 

CAUTION: 

Many repairs may only be done by a certified service technician. You 

should only perform troubleshooting and simple repairs as authorized in your 
product documentation, or as directed by the online or telephone service and 
support team. Damage due to servicing that is not authorized by Dell is not covered 
by your warranty. Read and follow the safety instructions that came with the 
product.

1

Try using a different tape cartridge.

2

Ensure that the device drivers for the tape drive are installed and are 
configured correctly. See your tape backup unit documentation for more 
information about device drivers.

3

Reinstall the tape-backup software as instructed in the tape-backup 
software documentation.

4

For external tape backup units, ensure that the interface cable is fully 
connected to the tape device and the external port on the controller card. 

5

For a SCSI tape backup unit, verify that the tape device is configured for a 
unique SCSI ID number and that the interface cable is properly 
terminated.
See the documentation for the tape backup unit for instructions on 
selecting the SCSI ID number and terminating the SCSI cable.

6

Run the appropriate online diagnostics tests. See "Using Dell™ 
PowerEdge™ Diagnostics."

7

Turn off the system and attached peripherals, and disconnect the system 
from the electrical outlet.

8

Open the system. See "Opening the System."

9

Check the internal cable and controller connections.

a

For SCSI tape devices, reseat the SCSI controller card in the 
expansion card slot and ensure that the interface cable is firmly 
connected to the SCSI connector.

Summary of Contents for POWEREDGE R710

















































































































































































































Reviews:

No comments

Related manuals for POWEREDGE R710

IBM 3270 Operation Manual preview
3270
Brand: IBM Pages: 86
Lauterbach C2000 Manual preview
C2000
Brand: Lauterbach Pages: 61
Data Translation DT300 Series Getting Started Manual preview
DT300 Series
Brand: Data Translation Pages: 98
Quatech DS-3000 User Manual preview
DS-3000
Brand: Quatech Pages: 27
Paradyne COMSPHERE 3800 Series Release Note preview
COMSPHERE 3800 Series
Brand: Paradyne Pages: 88
Paradyne COMSPHERE 3800PLUS Supplementary Manual preview
COMSPHERE 3800PLUS
Brand: Paradyne Pages: 5
Industrex M43ic Instruction Manual preview
M43ic
Brand: Industrex Pages: 51
NXP Semiconductors TWR-SB0410-36EVB User Manual preview
TWR-SB0410-36EVB
Brand: NXP Semiconductors Pages: 26
Maxim DS5001FP Specification Sheet preview
DS5001FP
Brand: Maxim Pages: 26
MiLAN E-MCC-1600 Install Manual preview
E-MCC-1600
Brand: MiLAN Pages: 1
Symantec PacketShaper PS-S200 Quick Start Manual preview
PacketShaper PS-S200
Brand: Symantec Pages: 2
IBA ibaFOB-4i-X Manual preview
ibaFOB-4i-X
Brand: IBA Pages: 33
Telex Communications 2472AA Instruction Manual preview
2472AA
Brand: Telex Communications Pages: 28
Arbor Technology Em104P-i2904 Quick Installation Manual preview
Em104P-i2904
Brand: Arbor Technology Pages: 8
IBM Power System H924 Installing Instructions preview
Power System H924
Brand: IBM Pages: 48
Rajant Corporation BreadCrumb CX1 User Manual preview
BreadCrumb CX1
Brand: Rajant Corporation Pages: 40
ATEN Slideaway CL1008 User Manual preview
Slideaway CL1008
Brand: ATEN Pages: 77
Kontron ePanel-C3 Technical Manual preview
ePanel-C3
Brand: Kontron Pages: 62

Brands by name

Popular brands

Load more brands