About Your System
31
E171F
PCIe fatal
error on Bus
## Device ##
Function ##
The system BIOS has
reported a PCIe fatal error
on a component that
resides in PCI
configuration space at bus
##, device ##, function
##.
Remove and reseat the
PCIe expansion cards. If
the problem persists, see
"Troubleshooting
Expansion Cards."
PCIe fatal
error on Slot
#. Review &
clear SEL.
The system BIOS has
reported a PCIe fatal error
on a component that
resides in the specified slot.
Reinstall the expansion-
card riser. See "Expansion
Cards and Expansion-
Card Risers." If the
problem persists, the riser
card or system board is
faulty. See "Getting Help."
E1810
Hard drive ##
fault. Review
& clear SEL.
The specified hard drive
has experienced a fault.
See "Troubleshooting a
Hard Drive."
E1812
Hard drive ##
removed.
Check drive.
The specified hard drive
has been removed from the
system.
Information only.
E1A11
PCI Riser
hardware &
configuration
mismatch.
Reconfigure.
PCIe risers are not
configured correctly. Some
invalid configurations
prevent the system from
powering on.
Reinstall the expansion-
card riser. See "Expansion
Cards and Expansion-
Card Risers."
If the problem persists,
the riser card or system
board is faulty. See
"Getting Help."
E1A12
PCI Riser not
detected.
Check Riser.
One or both of the PCIe
risers are missing. This
prevents the system from
powering on.
Reinstall the missing riser
card(s). See "Replacing
Expansion-Card Riser 1"
and "Replacing
Expansion-Card Riser 2."
Table 1-1.
LCD Status Messages
(continued)
Code
Text
Cause
Corrective Actions
Summary of Contents for POWEREDGE R710
