Controls and lights
Table 27. Controls and lights
Feature
Specification
Front of the computer
Power button light
White light — Solid white light indicates power-on state; slow blinking white
light indicates sleep state of the computer.
Drive activity light
White light — Slow blinking white light indicates that the computer is
reading data from or writing data to the hard drive.
Back of the computer
Link integrity light on integrated network adapter
Green — A 10 Mbps connection exists between the network and the
computer.
Green — A 100 Mbps connection exists between the network and the
computer.
Orange — A 1000 Mbps connection exists between the network and the
computer.
Off (no light) — The computer is not detecting a physical connection to the
network.
Network activity light on integrated network adapter Yellow light — A breathing yellow light indicates that network activity is
present.
Power supply diagnostic light
Green light — The power supply is turned On and is functional. The power
cable must be connected to the power connector (at the back of the
computer) and the electrical outlet.
Power
Table 28. Power Specifications
Feature
Specification
Wattage
240 W
AC input voltage range
90 – 264 Vac
AC input current (low ac range / high ac
range)
4 A/ 2 A
AC input frequency
47 Hz/ 63 Hz
Coin cell battery
3 V CR2032 lithium-coin-cell
72
System setup
Summary of Contents for OptiPlex 5055 Tower
Page 1: ...Dell OptiPlex 5055 Tower Owner s Manual Regulatory Model D18M Regulatory Type D18M004 ...
Page 12: ...4 Lift the front bezel to remove it from the computer 12 Disassembly and reassembly ...
Page 44: ...b Slide and lift the system board away from the computer 2 44 Disassembly and reassembly ...