Dell OptiPlex 5055 Tower Owner'S Manual Download Page 62 | Manualshive

Page: 62 / 80

background image

Option

Description

Fan Control Override

Allows you to determine the speed of the system fan. When this option is enabled, the system fan
runs at the maximum speed. This option is disabled by default.

USB Wake Support

Allows you to enable the USB devices to wake the computer from standby mode. The option "Enable
USB Wake Support" is selected by default

Wake on LAN/WWAN

This option allows the computer to power up from the off state when triggered by a special LAN
signal. This feature only works when the computer is connected to AC power supply.

•

Disabled

- Does not allows the system to power on by special LAN signals when it receives a

wake-up signal from the LAN or wireless LAN.

•

LAN

- Allows the system to be powered on by special LAN signals.

•

WLAN Only

- Allows the system to be powered on by special WLAN signals.

•

LAN or WLAN

- Allows the system to be powered on by special LAN signals or WLAN signals.

•

LAN with PXE Boot

- A wakeup packet sent to the system in either the S4 or S5 state, that will

cause the system to wake-up and immediately boot to PXE.

This option is Disabled by default.

Block Sleep

Allows you to block entering to sleep (S3 state) in OS environment. This option is disabled by default.

Table 12. POST Behavior

Option

Description

Numlock LED

Allows you to enable or disable the Numlock feature when your computer starts. This option is
enabled by default.

Keyboard Errors

Allows you to enable or disable the keyboard error reporting when the computer starts. This option is
enabled by default.

Warnings and Errors

This option can speed up the boot process by bypassing some compatibility steps:

•

Prompt on Warnings and Errors (enabled by default)

•

Continue on Warnings

•

Continue on Warnings and Errors

Extend BIOS POST Time

The options are:

•

0 seconds (default)

•

5 seconds

•

10 seconds

Full Screen Logo

This options is disabled by default.

Table 13. Virtualization Support

Option

Description

AMD-V Technology

This option is enabled by default.

AMD-VI Technology

This option is enabled by default.

Table 14. Maintenance

Option

Description

Service Tag

Displays the Service Tag of your computer.

Asset Tag

Allows you to create a system asset tag if an asset tag is not already set. This option is set by default.

62

System setup

«
...
60
61
62
63
64
...
»

Summary of Contents for OptiPlex 5055 Tower

















































































Reviews:

No comments

Related manuals for OptiPlex 5055 Tower

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands