Removing intrusion switch
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
b
3
.
4
To the intrusion switch:
a Disconnect the intrusion switch cable from the connector on the system board [1].
b Un-route the intrusion switch cable from the cable holder.
c Slide the intrusion switch and push it to remove from the computer [2].
Installing intrusion switch
1
Insert the intrusion switch into the slot on the computer.
2
Route the intrusion switch cable through the cable holder.
3
Connect the intrusion switch cable to the connector on the system board.
4
Close the front panel door.
30
Disassembly and reassembly
Summary of Contents for OptiPlex 5055 Tower
Page 1: ...Dell OptiPlex 5055 Tower Owner s Manual Regulatory Model D18M Regulatory Type D18M004 ...
Page 12: ...4 Lift the front bezel to remove it from the computer 12 Disassembly and reassembly ...
Page 44: ...b Slide and lift the system board away from the computer 2 44 Disassembly and reassembly ...
