Heat sink assembly
Removing heat sink assembly
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
b
3
.
4
To remove the heat sink assembly:
a Disconnect the heat sink assembly cable from the connector on the system board [1].
b Loosen the captive screws(6+/-1) that secure the heat sink assembly to the system board [2].
NOTE:
Loosen the screws based on the numbers available on the system board.
c Lift the heat sink assembly away from the computer [3].
36
Disassembly and reassembly
Summary of Contents for OptiPlex 5055 Tower
Page 1: ...Dell OptiPlex 5055 Tower Owner s Manual Regulatory Model D18M Regulatory Type D18M004 ...
Page 12: ...4 Lift the front bezel to remove it from the computer 12 Disassembly and reassembly ...
Page 44: ...b Slide and lift the system board away from the computer 2 44 Disassembly and reassembly ...