NOTE:
The tab may indicate 5.25 inch because you can also install a 5.25 inch hard drive in same drive bay.
Removing 3.5–inch hard drive from the hard drive bracket
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
b
c
3
To remove hard drive bracket:
a Pull one side of the hard drive bracket to disengage the pins on the bracket from the slots on the hard drive [1].
b Lift the hard drive out of the hard drive bracket [2].
Disassembly and reassembly
17
Summary of Contents for OptiPlex 5055 Tower
Page 1: ...Dell OptiPlex 5055 Tower Owner s Manual Regulatory Model D18M Regulatory Type D18M004 ...
Page 12: ...4 Lift the front bezel to remove it from the computer 12 Disassembly and reassembly ...
Page 44: ...b Slide and lift the system board away from the computer 2 44 Disassembly and reassembly ...
