manualshive.com logo in svg

Dell OptiPlex 5055 Tower, Owner'S Manual

The Dell OptiPlex 5055 Tower is a powerful and reliable desktop computer designed to meet the needs of demanding users. To maximize your experience with this device, we highly recommend downloading the comprehensive Owner's Manual. Get your free manual download from our website, ensuring you have all the information you need to optimize your OptiPlex 5055 Tower experience.

Share
Download
background image

c

Expansion card

3 

Open the 

Front panel door

.

4 

To remove the coin cell battery:

a Using a plastic scribe press the release latch until the coin cell battery pops out [1].
b Remove the coin cell battery from the connector on the system board [2].

Installing coin cell battery

1 

Hold the coin cell battery with the "+" sign facing up and slide it under the securing tabs at the positive side of the connector.

2 

Press the battery into the connector until it locks into place.

3 

Close the front panel door.

4 

Install the:

a

Expansion card

b

Front bezel

c

Back cover

5 

Follow the procedure in 

After working inside your computer

.

Disassembly and reassembly

35

Summary of Contents for OptiPlex 5055 Tower

















































































Reviews:

No comments

Related manuals for OptiPlex 5055 Tower

Brands by name

Popular brands

Load more brands