Dell M1530 - XPS laptop. TUXEDO Service Manual Download Page 86

Page: 86 / 118

Speaker

Disconnect the speaker cable connector from the system board.

Make note of the speaker cable routing.

Remove the speakers.

Replacing the Speaker

Replace the speakers and the speaker cables.

Connect the speaker cable connector to the system board.

Replace the two speaker screws (one on each speaker) that secure the

speakers to the computer base.

Connect the button board cable connector to the system board.

Replace the palm rest (see "Replacing the Palm Rest" on page 79).

Replace the display assembly (see "Replacing the Display Assembly" on

page 67).

speaker cable

connector

screw (2)

speaker cable

routing

Summary of Contents for M1530 - XPS laptop. TUXEDO























































































































Search results

Summary of Contents for M1530 - XPS laptop. TUXEDO

Reviews:

Related manuals for M1530 - XPS laptop. TUXEDO

Brands by name

Popular brands

Dell M1530 - XPS laptop. TUXEDO, Service Manual

Search results

Summary of Contents for M1530 - XPS laptop. TUXEDO

Reviews:

Related manuals for M1530 - XPS laptop. TUXEDO

Brands by name

Popular brands