Dell M1530 - XPS laptop. TUXEDO Service Manual Download Page 38

Page: 38 / 118

Communication Cards

Replacing a WLAN Card

NOTICE:

The connectors are keyed to ensure correct insertion. If you feel

resistance, check the connectors on the card and on the system board, and realign

the card.

NOTICE:

To avoid damage to the WLAN card, never place cables under the card.

Insert the

WLAN

card connector at a 45-degree angle into the system

board connector labeled "WLAN."

Press the other end of the

WLAN

card down into the slot on the system

board until the card clicks into place.

Replace the M2 x 3-mm securing screw.

Connect the appropriate antenna cables to the

WLAN

card you are installing:

If the WLAN card has two triangles on the label (white and black),

connect the white antenna cable to the connector labeled "main" (white

triangle), and connect the black antenna cable to the connector labeled

"aux" (black triangle).
If the WLAN card has three triangles on the label (white, black, and gray),

connect the white antenna cable to the white triangle, connect the black

Summary of Contents for M1530 - XPS laptop. TUXEDO























































































































Search results

Summary of Contents for M1530 - XPS laptop. TUXEDO

Reviews:

Related manuals for M1530 - XPS laptop. TUXEDO

Brands by name

Popular brands

Dell M1530 - XPS laptop. TUXEDO, Service Manual

Search results

Summary of Contents for M1530 - XPS laptop. TUXEDO

Reviews:

Related manuals for M1530 - XPS laptop. TUXEDO

Brands by name

Popular brands