Dell M1530 - XPS laptop. TUXEDO Service Manual Download Page 42

Page: 42 / 118

Communication Cards

Flash Cache Module or Ultra Wide Band

If you ordered an FCM card or an UWB card with your computer, it is already

installed

Only one of the cards can be installed in the slot provided.

The Flash Cache Module (FCM) is an internal memory card that helps

improve the performance of your computer. The FCM card is also known as

Intel Turbo Memory and the Intel® Flash Cache Logic Chip Mini-card.

NOTE:

This card is only compatible with the Microsoft Windows Vista™ operating

system.

Removing the FCM or UWB

Follow the procedures in "Before You Begin" on page 9.

Turn the computer over.

Loosen the two captive screws on the Mini Card module cover and remove

the cover.

Summary of Contents for M1530 - XPS laptop. TUXEDO























































































































Search results

Summary of Contents for M1530 - XPS laptop. TUXEDO

Reviews:

Related manuals for M1530 - XPS laptop. TUXEDO

Brands by name

Popular brands

Dell M1530 - XPS laptop. TUXEDO, Service Manual

Search results

Summary of Contents for M1530 - XPS laptop. TUXEDO

Reviews:

Related manuals for M1530 - XPS laptop. TUXEDO

Brands by name

Popular brands