Dell M1530 - XPS laptop. TUXEDO Service Manual Download Page 84

Page: 84 / 118

Optical Drive

Slide the drive at an angle toward the side of the computer.

Remove the cable connector from the back of the drive.

Lift the drive out of the computer base.

Replacing the Optical Drive

Connect the cable connector to the back of the drive.

Place the drive back in position and replace the two M2 x 3-mm screws

that secure the optical drive to the computer base.

Replace the palm rest (see "Replacing the Palm Rest" on page 79).

Replace the display assembly (see "Replacing the Display Assembly" on

page 67).

Replace the keyboard (see "Replacing the Keyboard" on page 56).

Replace the hinge covers and center control cover (see "Replacing the

Hinge Covers and Center Control Cover" on page 47).

optical drive

M2 x 3-mm screw (2)

cable connector

Summary of Contents for M1530 - XPS laptop. TUXEDO























































































































Search results

Summary of Contents for M1530 - XPS laptop. TUXEDO

Reviews:

Related manuals for M1530 - XPS laptop. TUXEDO

Brands by name

Popular brands

Dell M1530 - XPS laptop. TUXEDO, Service Manual

Search results

Summary of Contents for M1530 - XPS laptop. TUXEDO

Reviews:

Related manuals for M1530 - XPS laptop. TUXEDO

Brands by name

Popular brands