Dell M1530 - XPS laptop. TUXEDO Service Manual Download Page 15

Page: 15 / 118

Hard Drive

Replacing the Hard Drive

Remove the new drive from its packaging.
Save the original packaging for storing or shipping the hard drive.

NOTICE:

Use firm and even pressure to slide the drive into place. If you use

excessive force, you may damage the connector.

Replace the two screws on either side of the hard drive to connect it to the

bezel.

Slide the hard drive into the bay.

Replace and tighten the four screws on the hard drive cover.

Install the operating system for your computer, as needed (see "Restoring

Your Operating System" in your computer

Owner’s Manual

Install the drivers and utilities for your computer, as needed (see

"Reinstalling Drivers and Utilities" in your computer

Owner’s Manual

hard drive bezel

screw (2)

Summary of Contents for M1530 - XPS laptop. TUXEDO























































































































Search results

Summary of Contents for M1530 - XPS laptop. TUXEDO

Reviews:

Related manuals for M1530 - XPS laptop. TUXEDO

Brands by name

Popular brands

Dell M1530 - XPS laptop. TUXEDO, Service Manual

Search results

Summary of Contents for M1530 - XPS laptop. TUXEDO

Reviews:

Related manuals for M1530 - XPS laptop. TUXEDO

Brands by name

Popular brands