Dell M1530 - XPS laptop. TUXEDO Service Manual Download Page 60

Page: 60 / 118

Button Board

Remove the two screws securing the button board.

To release the button board cable, pull the black securing tabs of the cable

connector with your fingertips and ease out the cable.

Remove the button board from the system.

Replacing the Button Board

Replace the button board.

To reconnect the cable that attaches the button board to the system board,

place the cable inside the cable connector and push its black securing tabs

inside with your fingertips.

NOTICE:

The keycaps on the keyboard are fragile, easily dislodged, and time-

consuming to replace. Be careful when removing and handling the keyboard.

screw (2)

button board

button board cable

black securing tabs

Summary of Contents for M1530 - XPS laptop. TUXEDO























































































































Search results

Summary of Contents for M1530 - XPS laptop. TUXEDO

Reviews:

Related manuals for M1530 - XPS laptop. TUXEDO

Brands by name

Popular brands

Dell M1530 - XPS laptop. TUXEDO, Service Manual

Search results

Summary of Contents for M1530 - XPS laptop. TUXEDO

Reviews:

Related manuals for M1530 - XPS laptop. TUXEDO

Brands by name

Popular brands