Dell M1530 - XPS laptop. TUXEDO Service Manual Download Page 89

Page: 89 / 118

Hard Drive Cage

Hard Drive Cage

CAUTION:

Before you begin any of the procedures in this section, follow the

safety instructions in the

Product Information Guide

NOTICE:

To avoid electrostatic discharge, ground yourself by using a wrist

grounding strap or by periodically touching an unpainted metal surface (such as the

back panel) on the computer.

Removing the Hard Drive Cage

Follow the instructions in "Before You Begin" on page 9.

Remove the hard drive (see "Removing the Hard Drive" on page 13).

Remove the hinge covers and center control cover (see "Removing the

Hinge Covers and Center Control Cover" on page 45).

Remove the keyboard (see "Removing the Keyboard" on page 55).

Remove the display assembly (see "Removing the Display Assembly" on

page 63).

Remove the palm rest (see "Removing the Palm Rest" on page 75).

Remove the screw securing the hard drive cage to the computer base.

Summary of Contents for M1530 - XPS laptop. TUXEDO























































































































Search results

Summary of Contents for M1530 - XPS laptop. TUXEDO

Reviews:

Related manuals for M1530 - XPS laptop. TUXEDO

Brands by name

Popular brands

Dell M1530 - XPS laptop. TUXEDO, Service Manual

Search results

Summary of Contents for M1530 - XPS laptop. TUXEDO

Reviews:

Related manuals for M1530 - XPS laptop. TUXEDO

Brands by name

Popular brands