Docking Board
Removing the docking board
Prerequisites
1. Follow the procedure in
before working inside your tablet
2. Remove the
3. Remove the
.
4. Remove the
.
5. Remove the
.
6. Remove the
.
7. Remove the
.
8. Remove the
.
9. Remove the
10. Remove the
.
11. Remove the
.
12. Remove the
.
About this task
The figure indicates the location of the docking board and provides a visual representation of the removal procedure.
Steps
1. Remove the adhesive tape that secures the docking circuit board on the system chassis.
2. Remove the five (M2x5) screws that secure the docking circuit board on the system board chassis.
NOTE:
As the docking board is positioned beneath the system board, ensure to remove the system board, to replace
a faulty docking board.
3. Lift the latch, and slide to remove the docking board cable on the system board.
Removing and installing components
57
Summary of Contents for Latitude 7220
