manualshive.com logo in svg

Dell Latitude 7220, Service Manual

The Dell Latitude 7220 Service Manual is a comprehensive guide for troubleshooting and repairing this rugged tablet. Available for free download at manualshive.com, the manual provides detailed step-by-step instructions, enabling users to easily access and utilize the valuable resource to keep their device running smoothly.

Share
Download
background image

Steps

1. Align the smart card reader, and replace the eight (M2x5) screws that secure smart card reader to the system chassis.
2. Align and replace the wireless passthrough daughterboard on the system chassis.
3. Replace the copper adhesive shield to secure the wireless passthrough daughterboard to the smart card reader holder.
4. Replace the two (M2x5) screws that secure the wireless passthrough daughterboard to the system chassis.
5. Connect the smart card reader cable to the connector.
6. Flip the smart card reader cable.

Next steps

1. Install the 

docking board

.

2. Install the 

system board

.

3. Install the 

coin-cell battery

.

4. Install the 

front camera

.

5. Install the 

microphone

.

6. Install the 

WWAN

.

7. Install the 

WLAN

.

8. Install the 

solid-state drive

.

9. Install the 

system fan

.

10. Install the 

heat-sink

.

11. Install the 

display assembly

.

12. Install the 

batteries

.

13. Follow the procedure in 

after working inside your tablet

.

Removing and installing components

63

Summary of Contents for Latitude 7220





















































































Reviews:

No comments

Related manuals for Latitude 7220

Olympus SC1 Instruction preview
SC1
Brand: Olympus Pages: 2
Hand Held Products 2020 System Manual preview
2020
Brand: Hand Held Products Pages: 248
Unitech MS926P Quick Start Manual preview
MS926P
Brand: Unitech Pages: 2
Unitech MS912+ Quick Start Manual preview
MS912+
Brand: Unitech Pages: 17
Unitech MS912 Programming Manual preview
MS912
Brand: Unitech Pages: 6
Unitech MS842 Quick Start Manual preview
MS842
Brand: Unitech Pages: 2
Unitech MS840P Quick Start Manual preview
MS840P
Brand: Unitech Pages: 2
Unitech HT630 Quick Start Manual preview
HT630
Brand: Unitech Pages: 3
Nedap MACE MM QR Installation Manual preview
MACE MM QR
Brand: Nedap Pages: 30
Conceptronic CMULTITRV Multi Language Quick Manual preview
CMULTITRV
Brand: Conceptronic Pages: 2
Symbol LS 6800 User Manual preview
LS 6800
Brand: Symbol Pages: 249
Metrologic Tire and Rubber Application Sheet preview
Tire and Rubber
Brand: Metrologic Pages: 1
3nStar SC455 Programming Manual preview
SC455
Brand: 3nStar Pages: 60
Alien Skylark WMU2000 User Manual preview
Skylark WMU2000
Brand: Alien Pages: 28
Duali DE-930 User Manual preview
DE-930
Brand: Duali Pages: 12
Franklin BOOKMAN BPS-840 User Manual preview
BOOKMAN BPS-840
Brand: Franklin Pages: 42
Doorentryonline KP-401-EX Card Readre preview
KP-401-EX
Brand: Doorentryonline Pages: 12
Sony Reader PRS600R Quick Start Manual preview
Reader PRS600R
Brand: Sony Pages: 2

Brands by name

Popular brands

Load more brands