About this task
The following image indicates the location of the M.2 2280 solid-state drive and provides a visual representation of the installation
procedure:
Steps
1. Align the notch on the solid-state drive with the tab on the solid-state drive slot.
2. Replace the screw (M2x3) that secures the solid-state drive module to the system board.
Next steps
1. Install the
2. Install the
3. Install the
.
4. Follow the procedure in
after working inside your tablet
.
WLAN card
Removing the WLAN card
Prerequisites
1. Follow the procedure in
before working inside your tablet
2. Remove the
3. Remove the
.
About this task
The figure indicates the location of the WLAN card and provides a visual representation of the removal procedure.
32
Removing and installing components
Summary of Contents for Latitude 7220
