Replacing the 2.5-inch hard drive
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your computer
. After working inside your computer, follow the instructions in
. For more safety best practices, see the Regulatory Compliance home page at
Topics:
•
•
Procedure
1
Slide the bottom hard drive into the hard-drive bracket.
2
Align the screw holes on the bottom hard drive with the screw holes on the hard-drive bracket.
3
Replace the four screws (M3xL3.5) that secure the bottom hard-drive to the hard-drive bracket.
4
Align the screw holes on the top hard drive with the screw holes on the hard-drive bracket.
5
Replace the four screws (M3xL3.5) that secure the top hard drive to the hard-drive bracket.
6
Slide the hard drive into the slot on the drive cage until it snaps into place.
7
Replace the screw that secures the hard-drive assembly to the drive cage.
11
22
Replacing the 2.5-inch hard drive
Summary of Contents for Inspiron 3470
