Dell Inspiron 3470 Service Manual Download Page 13

Page: 13 / 82

Replacing the computer cover

WARNING:

Before working inside your computer, read the safety information that shipped with your computer and follow the

steps in

Before working inside your computer

. After working inside your computer, follow the instructions in

After working inside

your computer

. For more safety best practices, see the Regulatory Compliance home page at

www.dell.com/

regulatory_compliance

Procedure

Align the tabs on the computer cover with the slots on the chassis and slide it towards the front of the computer until it snaps into
place.

Replace the two screws (#6-32xL6.35) that secure the computer cover to the chassis.

Place the computer in an upright position.

Replacing the computer cover

Summary of Contents for Inspiron 3470



















































































Search results

Summary of Contents for Inspiron 3470

Reviews:

Related manuals for Inspiron 3470

Brands by name

Popular brands

Dell Inspiron 3470, Service Manual

Search results

Summary of Contents for Inspiron 3470

Reviews:

Related manuals for Inspiron 3470

Brands by name

Popular brands