Dell Inspiron 3470 Service Manual Download Page 65

Page: 65 / 82

Downloading drivers

Downloading the Audio driver

Turn on your computer.

Go to

www.dell.com/support

Enter the Service Tag of your computer, and then click

Submit

NOTE:

If you do not have the Service Tag, use the autodetect feature or manually browse for your computer model.

Click

Drivers & downloads

Click the

Detect Drivers

button.

NOTE:

Review on-screen instructions for browser-specific instructions.

Click

View Drivers for My System

Click

Download and Install

to download and install all driver updates detected for your computer.

Select a location to save the files.

If prompted, approve requests from

User Account Control

to make changes on the system.

10 The application installs all drivers and updates identified.

NOTE:

Not all files can be installed automatically. Review the installation summary to identify if manual installation is

necessary.

11 For manual download and installation, click

Summary of Contents for Inspiron 3470



















































































Search results

Summary of Contents for Inspiron 3470

Reviews:

Related manuals for Inspiron 3470

Brands by name

Popular brands

Dell Inspiron 3470, Service Manual

Search results

Summary of Contents for Inspiron 3470

Reviews:

Related manuals for Inspiron 3470

Brands by name

Popular brands