Dell Inspiron 3470 Service Manual Download Page 14

Page: 14 / 82

Removing the front bezel

WARNING:

Before working inside your computer, read the safety information that shipped with your computer and follow the

steps in

Before working inside your computer

. After working inside your computer, follow the instructions in

After working inside

your computer

. For more safety best practices, see the Regulatory Compliance home page at

www.dell.com/

regulatory_compliance

Topics:

•

Prerequisites

•

Procedure

Prerequisites

Remove the

computer cover

Procedure

Place the computer in an upright position.

Pry and release the tabs on the front bezel sequentially from the top, away from the chassis.

Rotate and pull the front bezel away from the computer to release the tabs on the front bezel from the front-panel slots.

Removing the front bezel

Summary of Contents for Inspiron 3470



















































































Search results

Summary of Contents for Inspiron 3470

Reviews:

Related manuals for Inspiron 3470

Brands by name

Popular brands

Dell Inspiron 3470, Service Manual

Search results

Summary of Contents for Inspiron 3470

Reviews:

Related manuals for Inspiron 3470

Brands by name

Popular brands