Dell Inspiron 3470 Service Manual Download Page 49

Page: 49 / 82

Replacing the power-button module

WARNING:

Before working inside your computer, read the safety information that shipped with your computer and follow the

steps in

Before working inside your computer

. After working inside your computer, follow the instructions in

After working inside

your computer

. For more safety best practices, see the Regulatory Compliance home page at

www.dell.com/

regulatory_compliance

Topics:

•

Procedure

•

Post-requisites

Procedure

Route the power-button board cable through the slot on the front panel.

Connect the power-button board cable to the system board.

Slide the ports on the front-I/O bracket into the slots on the chassis and align the screw holes on the front-I/O panel with the screw
holes on the chassis.

Replace the screw (#6-32xL6.35) that secures the front-I/O bracket to the chassis.

Replacing the power-button module

Summary of Contents for Inspiron 3470



















































































Search results

Summary of Contents for Inspiron 3470

Reviews:

Related manuals for Inspiron 3470

Brands by name

Popular brands

Dell Inspiron 3470, Service Manual

Search results

Summary of Contents for Inspiron 3470

Reviews:

Related manuals for Inspiron 3470

Brands by name

Popular brands