Dell Inspiron 3470 Service Manual Download Page 26

Page: 26 / 82

Replacing the 3.5-inch hard drive

WARNING:

Before working inside your computer, read the safety information that shipped with your computer and follow the

steps in

Before working inside your computer

. After working inside your computer, follow the instructions in

After working inside

your computer

. For more safety best practices, see the Regulatory Compliance home page at

www.dell.com/

regulatory_compliance

Topics:

•

Procedure

•

Post-requisites

Procedure

Slide the hard drive into the hard-drive bracket.

Align the screw holes on the hard drive with the screw holes on the hard-drive bracket.

Replace the two screws (#6-32xL3.6) that secure the hard-drive bracket to the hard drive.

Turn the hard-drive assembly over.

Slide and place the hard-drive assembly into the drive cage.

Replacing the 3.5-inch hard drive

Summary of Contents for Inspiron 3470



















































































Search results

Summary of Contents for Inspiron 3470

Reviews:

Related manuals for Inspiron 3470

Brands by name

Popular brands

Dell Inspiron 3470, Service Manual

Search results

Summary of Contents for Inspiron 3470

Reviews:

Related manuals for Inspiron 3470

Brands by name

Popular brands