Dell Inspiron 3470 Service Manual Download Page 28

Page: 28 / 82

Removing the optical drive

WARNING:

Before working inside your computer, read the safety information that shipped with your computer and follow the

steps in

Before working inside your computer

. After working inside your computer, follow the instructions in

After working inside

your computer

. For more safety best practices, see the Regulatory Compliance home page at

www.dell.com/

regulatory_compliance

Topics:

•

Prerequisites

•

Procedure

Prerequisites

Remove the

computer cover

Remove the

front bezel

Procedure

Place the computer on its side to access the parts inside the chassis.

Remove the two screws (#6-32xL6.35) that secure the drive cage to the chassis.

Push the release tab on the chassis and slide the drive cage to release it from the chassis

Disconnect the data cable and power cable from the optical drive.

Disconnect the data cables and power cables from the hard drives.

Removing the optical drive

Summary of Contents for Inspiron 3470



















































































Search results

Summary of Contents for Inspiron 3470

Reviews:

Related manuals for Inspiron 3470

Brands by name

Popular brands

Dell Inspiron 3470, Service Manual

Search results

Summary of Contents for Inspiron 3470

Reviews:

Related manuals for Inspiron 3470

Brands by name

Popular brands