1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
Steps
1. Align the guide on the cooling shroud with the slot on the system board.
2. Lower the cooling shroud into the chassis until it is firmly seated.
Figure 17. Installing the cooling shroud
a. cooling shroud
b. guide on the cooling shroud
c. slot on the system board
Next steps
Follow the procedure listed in the After working inside your system section.
Related tasks
Before working inside your system
After working inside your system
Removing the cooling shroud
Related reference
System memory
Your system supports DDR4 registered DIMMs (RDIMM).
NOTE:
MT/s indicates DIMM speed in MegaTransfers per second.
Memory bus operating frequency can be 2400 MT/s, 2133 MT/s, or 1866 MT/s depending on:
•
DIMM type ( RDIMM)
•
Number of DIMMs populated per channel
•
System profile selected (for example, Performance Optimized, Custom, or Dense Configuration Optimized)
•
Maximum supported DIMM frequency of the processors
58
Installing and removing system components
